New Features

• Grid Lines secondary feature functionality added
• Parallel Lines secondary feature functionality added
• Tree Inspection (BS3998) secondary feature functionality added, including RPR calculation support
• Alignment & Chainage functionality added
• Location search enhanced with additional status filters and search via location name
• Location card now includes “Mark as Finished” option
• New corner-by-corner navigation (Google Maps / Apple Maps) for features over 1km away
• Added number function support within !CALC expressions
• Signature attribute support (sketch canvas auto-sizes for signature capture)
• Photo & sketch attributes can now display thumbnails using !MODIFIER-SHOWTHUMBNAIL default value
• Support for ‘mobile-only’ user role

Mapping & Capture Improvements

• ESRI World Imagery now available as default layer (OS layers have been removed as defaults)
• Improved zoom-to-feature behaviour (auto street-level zoom & position lock handling)
• “Lock to Position” button now shows toast notifications when being toggled
• Recording of line and area features now starts directly on the map
• Improved automatic add node functionality for linear and area features. Including Start/Stop control
• Improved line annotation positioning for linear features
• Transparent polygon support added (colour #FFFF01 will have a transparent fill)
• Selected features now highlighted in cyan to match Soarvo portal
• Mandatory attributes now clearly indicated (red → green status bar)
• Error message text more verbose for when saving a feature (if geometry is empty or invalid etc)

Photo & Watermark Updates

Watermarks updated to use:

• Easting/Northing (BNG, TM65, TM75, ITM)
• X/Y for other projected systems
• Latitude/Longitude for EPSG:4326
• Bearing removed when not available on device

Fixes & Maintenance

• TPSDK (Catalyst) updated to v2025.1.28484.68
• General maintenance and library updates

The post Soarvo Mobile 0.0.157 Production Release Notes appeared first on Soarvo.

• Added _AUTO_ACCEPT and _ON_SAVE_ACTIONS feature type metadata settings attribute support.
• Added support for loading project-wide locations onto the map alongside the currently opened location.
• Added support for the MobileLocationZoom location tag to use a location’s anchor point as the initialmap center when opening a location.

Improvements

• Improved map annotation performance.
• Added #32CE32 as an additional color that defaults to a transparent polygon fill.

The post Soarvo Mobile 0.0.162 Production Release Notes appeared first on Soarvo.

App Version:
0.0.166+

This functionality is available on ANDROID ONLY and should only be abled on nordalp X6 PRO devices.

The X6 PRO RTK enabled device from nordalp integrates directly with the Soarvo Mobile application as a device position source. Below are the steps required to enable this.

nordalp RTK App Setup

A small amount of initial setup is required to be done in the nordalp RTK app.

Enable ‘GST’ NMEA messages for high accuracy readings. You may need to connect to the provider first to access the ‘Configuration’ menu. The video below shows this.

In the app settings, ensure ‘Auto Connect’ is unticked and set to ‘off’ for the provider, and ensure ‘Auto Connect’ is unticked and set to ‘off’ for Ntrip. As shown in the screenshot below.

Ensure you tap ‘Disconnect’ if the provider is connected

You can now exit the nordalp RTK app. If you wish, you can ‘Force Stop’ the app via holding down on the RTK app icon, selecting ‘App Info’, and then choosing the ‘Force Stop’ option.

Soarvo Mobile App Setup

With the nordalp RTK app setup, you should be able to follow along with the below video for how to set the X6 PRO device as a position source within the Soarvo Mobile app. You can select any Soarvo location to open, in the video ‘Test1’ is selected.

In the ‘GPS and Device Manager’ page you should be able to see the source for the current position, it should be ‘Nordalp X6 Pro’.

You can also add NTRIP details for RTK corrections. As you enter the NTRIP URL the other NTRIP based settings become visible. The format for the settings is shown below. the NTRIP URL needs to be a valid URL, so follows the format ‘{PROTOCOL}://{SERVER_ADDRESS}:{PORT}

The post nordalp X6 PRO Integration Guide appeared first on Soarvo.

New Features

• Support added for Nordalp X6 PRO as a position source.
• Added ability to move nodes for linear and area features
• Added ability to split linear features
• Email from previous login is now cached and automatically restored on the login page
• Added autogenerated inspection metadata attributes on parent features: _inspectedBy, _inspectedDate, _inspectedStatus
• Added _COPY_PARENT_GEOM settings attribute support for child inspection feature types (they must currently be of point geometry)
• Added !INSPECTEDDISTANCE default value code for child inspection feature types
• Added support for simplified icons
• Added “My Data Only” filter option to Features Overview page
• Added ability to log device positions

Data & Calculation Updates

• !LEN updated to perform 2D calculations, with new !LEN3D function added for 3D calculations
• Workaround implemented for floating point precision issues in !CALC expressions

Fixes & Maintenance

• Fixed issue where deleted projects remained on the device after removal
• Fixed antenna height adjustment issue for Trimble Precision SDK position source
• Workaround added for issue on iPadOS 26.1+ causing menus, modals, and bottom sheets to dismiss automatically

The post Soarvo Mobile 0.0.180 Production Release Notes appeared first on Soarvo.